Spec-aligned revision resources, group courses, and 1:1 tutoring for GCSE and A Level Physics — built by an experienced teacher and examiner.
Pick one and the page skips the question that isn’t on your course. Combined Science skips Question 5 (pressure in gases).
You will need: paper, a pen, a pencil, a ruler and a calculator. Your answers save automatically in this browser.
A teacher uses a tray filled with table tennis balls to model how particles are arranged in materials.
Initially the balls are arranged in a regular pattern, as shown in Figure 1. Which state of matter is best represented by the balls?
The teacher then moves the tray from side to side so that the balls are no longer in a regular pattern. Which state of matter is now best represented by the balls?
The teacher next moves the tray more vigorously, so that some of the balls jump out of the tray. The balls that leave the tray represent gas particles. Which two processes could this demonstration represent?
Choose “tick” for exactly two processes and “leave blank” for the other three.
Gases can be at different temperatures. The temperature of a gas is related to
Figure 2 shows some of the gas particles in a balloon. Describe the movement of the gas particles inside the balloon.
Tick each marking point your answer makes:
The gas in the balloon has a mass of 0.032 kg. The balloon has a volume of 0.025 m³. Calculate the density of the gas in the balloon.
Final answer not right? You can still earn method marks. Tick each step you wrote down (max 1):
A fridge-freezer contains water in three different states: ice in the freezer, liquid water in a bottle, and water vapour in the air.
Use your knowledge of the particle model to explain the differences in how the particles are arranged in solids, liquids and gases. Include in your answer any differences in how the particles move in each state of matter.
Arrangement: tick each point you made
Motion: tick each point you made
| 0 | No relevant content. | 0 |
|---|---|---|
| Level 1 | A simple description of the arrangement and / or the motion of the particles in the different states of matter. | 1–2 |
| Level 2 | A coherent description of both the arrangement and the motion of the particles in the different states of matter. | 3–4 |
| Level 3 | A detailed and coherent description of both the arrangement and the motion of the particles in the different states of matter. | 5–6 |
A student used the apparatus in Figure 3 to compare the specific heat capacities of different materials. The student measured the time taken to increase the temperature of each material by 10 °C. Figure 4 shows the student’s results.
The student makes the following conclusion: ‘The specific heat capacity of concrete is five times greater than tin.’ Use data from the bar chart to decide if the student’s conclusion is correct.
Tick each marking point your answer makes:
The iron block had a mass of 1.023 kg. The specific heat capacity of iron is 450 J/kg °C. Calculate the energy transferred by the heater to increase the temperature of the iron block by 10 °C. Give your answer to two significant figures.
Equation: change in thermal energy = mass × specific heat capacity × temperature change (ΔE = m c Δθ).
Final answer not right? You can still earn method marks. Tick each step you wrote down (max 2):
The student used the same apparatus to heat a 1 kg block of aluminium. He recorded the temperature of the block as it was heated from room temperature. The results are shown in Figure 5.
After how many minutes did the student record the incorrect temperature?
On paper, draw the line of best fit for the points plotted in Figure 5.
Compare your line with the gold line
What was the temperature of the room?
Another student suggested repeating the experiment using a heater with a greater power. Explain what effect this would have on the gradient of the graph.
Tick each marking point your answer makes:
The graph shows how the temperature of a pure substance changes as it cools from 330 °C.
Explain why the temperature of the substance is constant between the points marked J and K.
Tick each marking point your answer makes:
A book of scientific data contains the statement: ‘The specific latent heat of fusion of pure ice is 3.3 × 10⁵ J/kg.’ What does this statement mean?
Tick each marking point your answer makes:
The diagram shows one method of measuring the specific latent heat of fusion of ice in a laboratory where the temperature is 20 °C. Two funnels, A and B, contain equal amounts of crushed ice at 0 °C. The mass of melted ice from each funnel is measured after 12 minutes. The joulemeter measures the energy supplied to the heater.
Why is it necessary to set up funnel B to obtain accurate results?
Tick each marking point your answer makes:
The measurements taken are given in the table. Use the data to calculate the specific latent heat of fusion of ice.
| Mass of melted ice collected from funnel A | 63 g |
| Mass of melted ice collected from funnel B | 24 g |
| Joulemeter reading | 17 160 J |
Equation: thermal energy for a change of state = mass × specific latent heat (E = m L).
Final answer not right? You can still earn method marks. Tick each step you wrote down (max 1):
Suggest one reason why the value obtained by this method and the value given in the data book are not the same.
Tick each marking point your answer makes:
Skip this one. Pressure in gases is only on the Physics (triple) course, so it isn’t in your score.
Physics (triple) only. 5.4 is Higher tier.
Figure 6 shows air inside a cylinder with a movable piston.
The piston is pulled a little way in the direction of the arrow, but stays inside the cylinder. Which of these increases?
Figure 7 shows a rubber tube that is used inside a bicycle tyre. The tube is inflated with a bicycle pump.
The air inside the tube exerts an outward force on the wall of the tube. State the angle that this outward force makes with the wall of the tube.
It takes 4.8 litres of air from the atmosphere to inflate the empty tube to a pressure of 400 000 Pa. Atmospheric pressure is 100 000 Pa. Calculate the volume of air inside the tube. Assume the temperature of the air inside the tube is the same as the temperature of the air outside.
Equation: pressure × volume = constant (p V = constant).
Final answer not right? You can still earn method marks. Tick each step you wrote down (max 2):
When a bicycle pump is used to inflate the tube, the air in the pump gets warm. Ignore any effects of friction in the pump. Explain why the air in the bicycle pump gets warm.
Tick each marking point your answer makes:
| Question | Q1 | Q2 | Q3 | Q4 | Q5 | Total |
|---|---|---|---|---|---|---|
| Out of | 9 | 6 | 11 | 8 | 7 | 41 |
| Your mark | – | – | – | – | – | 0 |
Physics With Kate · FREE Online Physics GCSE Course · physicswithkate.com
Spec-aligned revision resources, group courses, and 1:1 tutoring for GCSE and A Level Physics — built by an experienced teacher and examiner.